Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Car Radio for Repair

Model: Renault Clio Clio 2, MK 2 - Years 1998-2005
Part: Car stereo

Enter the security PIN for the car radio and then switch it off. To remove the radio from the console, insert the appropriate tools into the side slots of the radio to release the retaining springs. At this point, slide the radio out of the compartment, carefully disconnecting the connectors. Remove the steering column cover and disconnect the remote control by pressing on the plastic tabs with a screwdriver. To reinstall the equipment, simply reconnect the connectors and gently slide the radio back into the compartment, taking care not to pinch the electrical cables.

Updated on 7 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing the Radio on a Clio
Removing the Radio on a Clio
Renault Clio (1998-2005 / Clio 2, MK 2) Removing the radio from a Renault Clio. Here's how to remove it and fit a new one in the dashboard. Insert the removal keys into the holes on the sid…
Removing the Radio from a Renault Clio
Removing the Radio from a Renault Clio
Renault Clio (2012-2019 / Clio IV, MK 4, Clio 4) Removing the radio from a Clio. Here's how to do it. Use a lever to detach the covering of the radio: remove it from the central dashboard. Once the …
How to Install a Navigation System in a Clio 3
How to Install a Navigation System in a Clio 3
Renault Clio (2005-2013 / MK 3, Clio 3, Clio III) Want to install a new car radio in the dashboard of a Renault Clio? Let's look at how to remove the old car radio. Insert the release keys into the h…

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos