Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the car stereo of the Renault Clio

Model: Renault Clio Clio IV, Clio 4, MK 4 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Car stereo

See other generations:
Video tutorial

Replacing the car radio on a Renault Clio mk4 model vehicle is a simple and quick operation to be carried out independently. We start the replacement by removing the central dashboard containing the previous car radio.

Being careful not to damage the clips, we remove the panel and unscrew the screws that lock the radio screen. We disconnect the connector and the antenna cable.

We connect the new car radio device to the connector and the antenna cable. We install the car radio and tighten the screws.

We mount the central dashboard and test the car radio functionality, it may be necessary to program the stations.


Posted on 17 August 2025 by ScegliAuto


Related tutorials

How to remove the radio from the Renault Clio
How to remove the radio from the Renault Clio
Renault Clio (2012-2019 / Clio IV, Clio 4, MK 4) In today's video tutorial, we will see the main steps to remove and replace the standard radio of the Renault Clio. First, get into the vehicle and s…
How to replace the car radio in the Renault Clio?
How to replace the car radio in the Renault Clio?
Renault Clio (2012-2019 / Clio IV, Clio 4, MK 4) In this tutorial we can see how to replace the car radio in the Renault Clio, an extremely simple and quick operation. First of all, make sure that t…
How to replace the car radio antenna of the Renault Clio
How to replace the car radio antenna of the Renault Clio
Renault Clio (2005-2013 / Clio 3, MK 3, Clio III) Below we will see the instructions that will allow us to disassemble and replace the car radio antenna of the Renault Clio, in simple steps. First of…

Other guides you may be interested in

How to Reset the Tyre Light on a Toyota Aygo?

To reset the tyre light on a Toyota Aygo, start by locating the reset button, which is found in the glove compartment of the front passenger side. Turn on the car and ensure that the tyres are at the correct pressure. Then, press and hold the reset button for a few seconds until the tyre light either flashes or turns off, depending on the model. Release the button and wait for the reset procedure to complete. Restart your Toyota Aygo and check if the tyre light has turned off, indicating that the reset was successful.

Watch the video!


by ScegliAuto

More videos