Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Renault Twingo 3 headlight bulb replacement

Model: Renault Twingo Twingo 3, Twingo III - Years 2014-2024
Part: Headlight bulb

Today we will see how to remove and replace the headlight bulb of a second series Renault Twingo. First we open the bonnet and we go to remove the rubber gasket that we find behind the headlight, which serves as a protection for the bulbs; then we go to unhook the metal clip and disconnect the electrical connector, in order to extract the bulb. At this point let's replace it with the new one, of the right type and with the same attack (in the case of the video it is replaced with a LED lamp), and let's insert and fix it in the correct way by applying the reverse procedure!

Posted on 26 July 2021 by ScegliAuto

Video tutorial

Related tutorials

How to replace headlight bulbs on Renault Twingo
How to replace headlight bulbs on Renault Twingo
Renault Twingo (2007-2014 / Twingo 2) How to replace headlight bulbs on Renault Twingo? We open the front hood by pulling the lever located at the bottom left of the dashboard, let's put …
How to replace the headlight bulbs in the Renault Twingo?
How to replace the headlight bulbs in the Renault Twingo?
Renault Twingo (2007-2014 / Twingo 2) As we can see in this tutorial, replacing the headlight bulbs of the Renault Twingo is an extremely simple and fast operation. First of all, let's ma…
Renault Twingo 1.2 engine oil replacement
Renault Twingo 1.2 engine oil replacement
Renault Twingo (2007-2014 / Twingo 2) In this video tutorial we will see how to replace the engine oil in a Renault Twingo 2 1.2: in addition we will also replace the oil filter. At this …

Other guides you may be interested in

How to Install Roof Bars on a Fiat 500L

Learn how to fit universal roof bars on a Fiat 500L. These bars are used on vehicles with or without roof rails. Assemble the roof bar kit (as shown in the video) with bars adjusted to the width of the vehicle (measure with a tape measure). Position the brackets at both ends of the doors on the vehicle's original roof rails. Once the anchoring bracket width is set, tighten the bolts with a butterfly nut (if a lock is present) until fully secured to the roof rails. Fit safety caps on both sides.

Watch the video!


by ScegliAuto

More videos