Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the front brake disc of a Renault Megane

Model: Renault Megane Megane 3, Megane III - Years 2008-2015
Part: Brake rotors

Before starting, we will have to raise the front end of our Renault Megane. So let's start by disassembling the front wheel, unscrewing the relative fixing bolts. Next, we will have to unscrew and remove the brake caliper fixing bolts, and then move the brake caliper itself. Once this is done, we will have to unscrew and remove the central hub nut. At this point we will have to unscrew the fixing screws of the disc, to then disengage and remove the disc itself. When we have removed the front brake disc of our Renault Megane, we will have successfully completed the disassembly.

Posted on 15 August 2021 by ScegliAuto

Video tutorial

Related tutorials

Replacing the rear disc on Renault Megane
Replacing the rear disc on Renault Megane
Renault Megane (2002-2010 / Megane 2) Does the rear brake disc of a Renault Megane need to be replaced? Let's see how the brake disc is removed. We lift the car with a column bridge, imme…
How to Remove the Rear Brake Disc on a Renault Megane
How to Remove the Rear Brake Disc on a Renault Megane
Renault Megane (2002-2010 / Megane 2) Learn how to remove and replace the brake disc on a Renault Megane. First, lift the car on a column jack to the desired height, then remove the wheel…
How to Replace the Front Brake Pads on Renault Megane
How to Replace the Front Brake Pads on Renault Megane
Renault Megane (2002-2010 / Megane 2) How to replace the front brake pads on a Renault Megane. Position your car on a column lift and raise it to a comfortable working height. Use a socke…

How to Replace the Timing Belt on a Lancia Delta

How do you replace the timing belt on a Lancia Delta? Lift the car on a column lift. Open the bonnet, remove the engine soundproofing panel and the metal timing belt cover. Using a suitable spanner, loosen the tensioner pulley and slide the belt off its seat. After fitting the new belt, use the spanner to tension the tensioner pulley, tightening until the belt has the correct tension (as previously installed). Finally, check the tensioner and the belt itself, and tighten everything with a socket wrench.

Watch the video!


by ScegliAuto

More videos