Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Door Panel of the Renault Scenic?

Model: Renault Scenic - Years 1996-2003
Part: Car door

To replace the door panel of the Renault Scenic, first loosen the screw located in the recess of the internal handle. Next, unscrew the screw inside the armrest, next to the window switches. The other two screws to remove are located at the bottom of the panel. The last part to remove will be the speaker, which requires the removal of four additional fixing screws. At this point, the old panel can be extracted by disconnecting all the connectors attached to it. Once completed, you can fit the new panel.

Updated on 21 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Door Panel on a Renault Scenic 2
Replacing the Door Panel on a Renault Scenic 2
Renault Scenic (2003-2009 / MK 2, Scenic 2) Let's see how to replace the door cover panel on a Renault Scenic 2. Remove the cover of the external door handle and take out the window lift button…
Removing the Lock Cylinder on a Renault Scenic 3
Removing the Lock Cylinder on a Renault Scenic 3
Renault Scenic (2003-2009 / MK 2, Scenic 2) Do you want to remove the cylinder or the door lock on a Scenic? Let's look at removing the lock from inside the door. Open the car door, unscrew the…
How to Remove the Window Regulator Motor from Renault Scenic
How to Remove the Window Regulator Motor from Renault Scenic
Renault Scenic (1996-2003 / ) Remove the window regulator motor from a Renault Scenic? First, remove the door panel. Use a screwdriver to unscrew the fixing screws in the internal…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos