Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of Front Headlight Bulb

Model: Renault Megane Megane 2 - Years 2002-2010
Part: Headlight bulb

To replace the front headlight bulb, you do not need to open the bonnet, as there is not enough space in the engine compartment to reach the bulb holder. Renault technicians have addressed this by creating access from the wheel arch: essentially, along the wheel arch, right at the height of the headlight, there is a cap (a sort of hatch) that allows relatively easy access to the headlight. To make the operation even more practical, it is suggested to lift the vehicle, remove the wheel, and then remove the cap that allows access to the bulb holder for the bulb replacement.

Updated on 8 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the front headlight bulb of the 2014 Renault Megane
How to replace the front headlight bulb of the 2014 Renault Megane
Renault Megane (2008-2015 / Megane 3, Megane III) To replace the headlight bulb of a 2014 Renault Megane, it is necessary to remove the headlight. Therefore, we open the front hood and using a torque…
How to replace the front headlight bulb of the Renault Megane RS
How to replace the front headlight bulb of the Renault Megane RS
Renault Megane (2008-2015 / Megane 3, Megane III) In this new mini guide dedicated to all of you who own a Renault Megane RS, we will discover how to correctly replace the headlight bulb. First, make…
Replacing Front Headlamp Bulb
Replacing Front Headlamp Bulb
Renault Megane (2008-2015 / Megane 3, Megane III) To replace the front headlamp bulbs, you must remove the headlamp itself, as there is insufficient space in the engine bay to access the bulb holders…

Other guides you may be interested in

How to Replace the Cabin Fan Resistor on a BMW 3 Series

How to Replace the Cabin Fan Resistor on a BMW 3 Series. Open the door and remove the plastic cover under the dashboard on the right side. Use a trim tool to pry off the cover next to the dashboard. Get a screwdriver or a cordless drill, open the glove compartment, and unscrew the fastening screws around the perimeter with a screwdriver. Once this is done, pull out the glove compartment and disconnect the power cables. Remove the fan resistor from its housing, insert the new part into the filter holder, and reassemble all the components of the glove compartment as you disassembled them earlier.

Watch the video!


by ScegliAuto

More videos