Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Renault
  4. :
  5. Clio
  6. : Engine air filter replacement

Renault Clio - Video tutorial

Model: Renault Clio Clio 2, MK 2 - Years 1998-2005
Part: Air filter
Operation: Engine air filter replacement

The engine air filter container is located in the rear part of the engine itself, fixed by means of two straps hooked with bayonet locks; first unhook the vacuum tube and then the fastening hooks of the belts; at this point separate the two elements that make up the filter container, extract the old filter and insert the new one. Reassemble the container and re-attach it to the intake manifold, fixing it with the relative straps. If the old filter is slightly wet with oil, it means the engine has started to lose compression and therefore there are oil leaks in the intake: for an old car this is almost a normal condition.


Posted on 20 July 2023 by ScegliAuto



Replacing the air filter on a Clio 4
Renault Clio (2012-2019 / Clio IV, Clio 4, MK 4) We see the replacement of an air filter on a Renault Clio 4. We lift the front hood of the car, locate the filter holder and begin the disassembly of
Engine air filter replacement
Renault Clio (1998-2005 / Clio 2, MK 2) Open the engine hood and locate the filter container. With a ratchet wrench remove the sealing nuts of the air box of the filter which you will subse
Engine air filter replacement
Renault Clio (1998-2005 / Clio 2, MK 2) The engine air filter container (airbox) is located right above the engine and not in a lateral position as in many vehicles: in order to access the

    Frequently Asked Questions

    • Clio 2005-2013 - Where is the air filter located in the Renault Clio 3 16V? Read Answer
    • Clio 2019-2026 - Where is the cabin air filter located in the Renault Clio? Read Answer
    • Clio 2012-2019 - Where is the Renault Clio air filter located? Read Answer
    • Clio 2005-2013 - Where is the Renault Clio air filter located? Read Answer

Disassembly of the gear knob on the Lancia Ypsilon 2

Today we will see, in this video tutorial, how to remove and replace the gear knob on the second series Lancia Ypsilon, but also on the Lancia Musa, in simple and quick steps. We get inside the car and start by removing the old gear knob; to do this, just unscrew it anticlockwise, as shown in the video. At this point we also remove the gearshift gaiter, in order to replace, if necessary, it too; we just have to fix the new headset and insert the new gear knob, screwing it correctly and without creating play on the gear lever!

Watch the video!


by ScegliAuto

More videos