Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Headlamp Bulb on a Renault Trafic?

Model: Renault Trafic MK 3 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025
Part: Light bulb

See other generations:
Video tutorial

To replace the headlamp bulb on the Renault Trafic, first open the tailgate and loosen the screws located near the seal. After loosening the screws, you need to unclip the clips that secure the headlamp from the side: once the clips are unclipped, the headlamp and its cover can be removed from their housing.

This will allow you to pull the bulbs out from inside their housing and replace them with new spare parts. Once the new bulbs are installed, you can reinsert the headlamp and its cover.


Updated on 27 April 2026 by ScegliAuto


Related tutorials

How to Replace the Side Indicator on the Renault Trafic 2016
How to Replace the Side Indicator on the Renault Trafic 2016
Renault Trafic (2014-2026 / MK 3) If one of the side indicators on your 2016 Renault Trafic has suddenly stopped working, don't worry because with the following guide you will be able…
Replacing the Position Light Bulb on a Renault Trafic
Replacing the Position Light Bulb on a Renault Trafic
Renault Trafic (2014-2026 / MK 3) When the position light bulb on your Renault Trafic burns out, replace it as soon as possible for your safety and to avoid penalties. Open the bonnet…
How do you remove the rear taillight of the Renault Trafic 2?
How do you remove the rear taillight of the Renault Trafic 2?
Renault Trafic (2001-2014 / MK 2) Reaching the disassembly of the rear light of the Renault Trafic 2, like any other vehicle on the market, is related to various needs. It may need to…

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos