Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Resetting the Emission Warning Light on the Renault Megane 3

Model: Renault Megane Megane III, Megane 3 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Warning light – error code

See other generations:
Video tutorial

This video outlines the main steps to reset the emission warning light on the Renault Megane third series, as well as on the Scenic 3 and Kangoo. First, lift the vehicle and locate the electrical connector of the particulate filter sensor.

Now, disconnect it by releasing the tab with something thin. At this point, reconnect the cable after performing any necessary regeneration of the filter.

Then, get in the vehicle and you will see that the emission warning light has reset on the instrument cluster, as shown in the video!


Updated on 28 April 2026 by ScegliAuto


Related tutorials

How to Reset the TPMS Light on a Renault Megane
How to Reset the TPMS Light on a Renault Megane
Renault Megane (2015-2023 / Megane IV, Megane 4) When the TPMS light comes on, it is necessary to adjust the tyre pressure. After that, you can proceed to reset the light. To reset it on a Renault M…
How to reset the service light on the Renault Megane
How to reset the service light on the Renault Megane
Renault Megane (2002-2010 / Megane 2) Today we will explain how to reset the service light on a Renault Megane vehicle. To reset the light, we need to turn on the instrument panel and pre…
How to Reset the Service Light on the Renault Megane 4
How to Reset the Service Light on the Renault Megane 4
Renault Megane (2015-2023 / Megane IV, Megane 4) The service light, related to the vehicle's service interval, on a Renault Megane Mk4 activates when maintenance is due. You must then reset the ligh…

    Frequently Asked Questions

    • Megane 2008-2015 - What does the error code DF017 mean on the Renault Megane 2? Read answer

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos