Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on a Renault Trafic?

Model: Renault Trafic MK 2 - Years 2001-2014
Part: Service warning light

Resetting the service light on a first-generation Renault Trafic is a very simple and quick operation, to be performed only after completing the scheduled maintenance operations described in the manual. To proceed with the reset, first press the accelerator pedal all the way down, keeping it pressed, turn the key to one position, and turn on the ignition. At this point, while still holding the accelerator, press the brake pedal three times as shown in the video. Continuing with the accelerator pressed, turn off the ignition and release the pedal. Turn on the ignition one last time and check that the procedure has been successful.

Updated on 28 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light on the Renault Trafic?
How to Reset the Service Light on the Renault Trafic?
Renault Trafic (2001-2014 / MK 2) To reset the Service light on the Renault Trafic, turn on the ignition by turning the key in the ignition switch. Once the dashboard is illuminated, …
How to reset the Service light on a Renault Trafic?
How to reset the Service light on a Renault Trafic?
Renault Trafic (2001-2014 / MK 2) To reset the Service light on a Renault Trafic, turn on the ignition by inserting the key into the ignition barrel and turning it clockwise. Before t…
How to Reset the Service Light on the Renault Trafic?
How to Reset the Service Light on the Renault Trafic?
Renault Trafic (2014-2026 / MK 3) To reset the Service light on the Renault Trafic, turn on the ignition by rotating the key in the ignition switch: once the dashboard lights up, navi…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos