Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on a Renault Scenic

Model: Renault Scenic MK III, Scenic III, Scenic 3, MK 3 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Service warning light

See other generations:
Video tutorial

In this video, see how to reset the service light on a Renault Scenic. To start, press the button on the lever behind the steering wheel, shown at minute 0:25. Press it to scroll through the menu until you reach the service warning.

At this point, press and hold the button: after a few seconds, the warning will start to flash. Continue to hold the button until the new mileage count appears.

Only then should you release the button; this will set a new mileage count, after which the service light will illuminate again.


Updated on 8 May 2026 by ScegliAuto


Related tutorials

How to Reset the "Service" Light on a Renault Scenic?
How to Reset the "Service" Light on a Renault Scenic?
Renault Scenic (2009-2015 / MK III, Scenic III, Scenic 3, MK 3) Before you can start, ensure that the service has been performed, then sit in the driver's seat of your Renault Scenic. Begin by activating the instr…
How to Reset the "Service" Light on a Renault Scenic
How to Reset the "Service" Light on a Renault Scenic
Renault Scenic (2003-2009 / Scenic 2, MK 2) Before starting, sit in the driver's seat of your Renault Scenic. Activate the engine by turning the key in the ignition. Next, select the "Service" …
Service reset on a Renault Scenic 4
Service reset on a Renault Scenic 4
Renault Scenic (2016-2022 / Scenic IV, Scenic 4, MK IV, MK 4) .. Today we will see how to reset the service light on a Renault Scenic 4. We start the procedure by turning on the ignition.. …

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos