Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the "Service" Light on a Renault Scenic

Model: Renault Scenic MK 2, Scenic 2 - Years 2003-2009
Part: Service warning light

Before starting, sit in the driver's seat of your Renault Scenic. Activate the engine by turning the key in the ignition. Next, select the "Service" option in the multifunction display menu. At this point, confirm the reset by holding down the relevant button until the "Service" light turns off. Once the "Service" light goes out, release the button, and you will have successfully completed the reset.

Updated on 7 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the "Service" Light on a Renault Scenic?
How to Reset the "Service" Light on a Renault Scenic?
Renault Scenic (2009-2015 / Scenic 3, MK 3, MK III, Scenic III) Before starting, ensure that the service has been completed, then sit in the driver's seat of your Renault Scenic. Begin by activating the instrument…
How to Reset the "Service" Light on a Renault Scenic?
How to Reset the "Service" Light on a Renault Scenic?
Renault Scenic (2009-2015 / Scenic 3, MK 3, MK III, Scenic III) Before you can start, ensure that the service has been performed, then sit in the driver's seat of your Renault Scenic. Begin by activating the instr…
How to reset the service light on the Renault Scenic 2017
How to reset the service light on the Renault Scenic 2017
Renault Scenic (2016-2022 / MK IV, Scenic 4, MK 4, Scenic IV) If you want to carry out the manual reset of the service light of your 2017 Renault Scenic, you just need to follow all the steps described in our ne…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos