Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on a Renault Captur

Model: Renault Captur MK 2 - Years: 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Service warning light

See other generations:
Video tutorial

Inside your Renault Captur, there is a special sensor that automatically alerts the driver when maintenance is due. If the warning message or light continues to appear after performing the required service, you need to manually reset the reading data.

To do this, follow the guide below.

First, press the "Start" button and turn on the ignition. Then, using the upper button at the end of the right steering lever, scroll through the menu until you find the maintenance option.

At this point, press and hold the same button for a few seconds and release it at the end of the reset.


Updated on 10 May 2026 by ScegliAuto


Related tutorials

How to Reset the Service Light on a Renault Captur?
How to Reset the Service Light on a Renault Captur?
Renault Captur (2013-2019 / MK 1) To reset the Service light on a Renault Captur, turn on the instrument panel to navigate through the menu: press the button located at the bottom of …
How to Reset the Service Light on the Renault Captur?
How to Reset the Service Light on the Renault Captur?
Renault Captur (2013-2019 / MK 1) From the display of the Renault Captur, you can completely clear the Service light by turning on the instrument panel to access the menu. To do this,…
How to reset the Service light on the Renault Captur?
How to reset the Service light on the Renault Captur?
Renault Captur (2013-2019 / MK 1) In the Renault Captur, to reset the Service light, first turn on the instrument cluster to navigate the menu. Press the button located at the bottom …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos