Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Renault
    3. :
  3. Scenic
    4. : How to replace the cabin filter in the Renault Scenic?

Renault Scenic - Video tutorial

Model: Renault Scenic MK 2, Scenic 2 - Years 2003-2009
Part: Cabin air filter
Operation: How to replace the cabin filter in the Renault Scenic?

As we can see in this tutorial, replacing the cabin filter in the Renault Scenic is a very simple and fast operation. To do this we will need a pair of long pliers and obviously the right spare. To access the filter, we open the engine hood and remove the small panel located in the central part of the windshield frame. Subsequently, let's extract it with the help of the long pliers, clean the inside of the housing from any residues and insert the spare part, taking care to position it in the right direction. Finally, we tighten the compartment panel and close the hood.


Posted on 24 April 2024 by ScegliAuto

    Frequently Asked Questions

    • Scenic 2016-2022 - Where is the cabin air filter located in the Renault Scenic 4? Read Answer
    • Scenic 2009-2015 - Where is the cabin filter located in the Renault Scenic? Read Answer
    • Scenic 2016-2022 - Where is the cabin air filter located in the Renault Scenic 4? Read Answer
    • Scenic 2016-2022 - What is the location of the cabin air filter on the Renault Scenic? Read Answer
    • Scenic 2009-2015 - Where is the cabin filter on the Renault Scenic III? Read Answer
    • Scenic 2009-2015 - Where is the cabin filter on the Renault Scenic Xmode? Read Answer

How to reset the TPMS light of the Volkswagen Polo 2011

The orange tire light indicates the presence of one or more tires with an inflation pressure below the recommended limit. All this is easily solved by inflating them correctly or replacing them in the event of a puncture. After carrying out these operations it is necessary to reset the warning light and therefore also the sensor in order to have new reading data. All you have to do is start the car ignition and then fully open the glove compartment on the passenger side. Locate the two buttons in the right corner and press "Set". At this point the reset is complete and you can turn off the ignition.

Watch the video!


by ScegliAuto

More videos