Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Rear Wiper Arm and Motor on the Renault Scenic

Model: Renault Scenic MK 2, Scenic 2 - Years 2003-2009
Part: Windshield wipers

In today's video, we will go through the main steps to remove and replace the wiper arm and motor on the Renault Scenic. First, open the boot lid and start by unscrewing the fixing screws of the boot lid to remove it; then unscrew the screws of the mechanism and the rear wiper motor, disconnecting the electrical connector to remove it, as illustrated in the video. Now, unscrew the pin of the wiper arm to remove it from the outside; replace it with the new one, following the video to the end!

Updated on 17 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Rear Wiper Blade on a Renault Scenic
How to Change the Rear Wiper Blade on a Renault Scenic
Renault Scenic (2003-2009 / MK 2, Scenic 2) Let's see how to change the rear wiper blade on a Renault Scenic. This is a very simple task to do yourself. Grip the rear wiper arm, gently pull it …
How to Change the Rear Wiper Blade on a Renault Scenic
How to Change the Rear Wiper Blade on a Renault Scenic
Renault Scenic (1996-2003 / ) How to replace the rear wiper blade on your car? Let's see how to replace the rear wiper blade of a Renault Scenic Rx4: take the rear wiper blade wit…
How to Replace the Rear Wiper Blade on a Renault Scenic
How to Replace the Rear Wiper Blade on a Renault Scenic
Renault Scenic (2009-2015 / Scenic 3, MK 3, MK III, Scenic III) Let's briefly go over the instructions that will allow us to remove and replace the rear wiper blade on the Renault Scenic in simple and quick steps.…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos