Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Renault
    3. :
  3. Clio
    4. : How to deactivate the passenger airbag in the Renault Clio?

Renault Clio - Video tutorial

Model: Renault Clio Clio 2, MK 2 - Years 1998-2005
Part: Airbags
Operation: How to deactivate the passenger airbag in the Renault Clio?

In this tutorial we can see how to deactivate the airbag on the passenger side of the Renault Clio 2. This operation is mandatory, according to the highway code, whenever a child seat is placed in the opposite direction to the direction of travel. All that needs to be done is to insert the car key in the special block, located on the control console of the passenger door, and rotate it to the desired position. Once deactivated, we will find the relative warning light in the dashboard. Remember to activate it again once the seat has been removed.


Posted on 8 May 2024 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Clio 1998-2005 - What does the "SERV" light on the Renault Clio mean? Read Answer
    • Clio 1998-2005 - What to do if the airbag warning light turns on in a Renault Clio 2? Read Answer
    • Clio 2005-2013 - What does it mean when the airbag warning light goes on and off on Renault Clio 3? Read Answer
    • Clio 2005-2013 - What does the DF071 error message mean in the Renault Clio? Read Answer
    • Clio 2005-2013 - How much does it cost to replace the Clio III airbag? Read Answer
    • Clio 1998-2005 - Why does the Renault Clio seat airbag not work? Read Answer
    • Clio 2005-2013 - Airbag warning light on Renault Clio 3? Read Answer
    • Clio 2005-2013 - What does the Renault Clio airbag warning light mean? Read Answer
    • Clio 2005-2013 - How much does it cost to replace the steering wheel airbag on Renault Clio 3? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos