Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Fuel Filter on the Renault Symbol

Model: Renault Symbol Symbol III - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Fuel filter

See other generations:
Video tutorial

To replace the fuel filter on this car model, follow the images in the video and refer to the description below. First, lift the vehicle and locate the filter, which is located at the rear of the car next to the gasoline tank.

It is easily recognizable because it is cylindrical and has two inlet and outlet hoses. Disconnect the two hoses and remove the support nuts of the filter.

Then take the new filter, position it, and secure it to the frame before reconnecting the inlet and outlet hoses.


Updated on 27 May 2026 by ScegliAuto


Related tutorials

How to Replace the Fuel Filter on the Renault Symbol
How to Replace the Fuel Filter on the Renault Symbol
Renault Symbol (1999-2008 / Symbol I) To replace the fuel filter on the Renault Symbol, you need to lift the car to access the components underneath. In the lower central area, you will l…
Where are the fuses located on the Renault Symbol?
Where are the fuses located on the Renault Symbol?
Renault Symbol (2008-2012 / Symbol II) On the Renault Symbol, the fuses are housed in the corresponding fuse boxes installed in the vehicle: in this type of vehicle, you will find two boxe…
How to Change Engine Oil and Oil Filter on Renault Symbol
How to Change Engine Oil and Oil Filter on Renault Symbol
Renault Symbol (1999-2008 / Symbol I) Below are the steps to perform routine maintenance by replacing the engine oil and oil filter on the Renault Symbol. First, lift the vehicle and star…

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos