Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change Engine Oil and Oil Filter on Renault Symbol

Model: Renault Symbol Symbol I - Years: 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008
Part: Engine oil

See other generations:
Video tutorial

Below are the steps to perform routine maintenance by replacing the engine oil and oil filter on the Renault Symbol. First, lift the vehicle and start unscrewing the oil drain bolt located under the engine, allowing it to drain into a container for about ten minutes; then open the hood to unscrew the oil filter cartridge, replacing it with a new one as shown in the video.

Now unscrew the fill cap and top off, pouring the appropriate oil for your engine and filling to the maximum level mark!


Updated on 7 June 2026 by ScegliAuto


Related tutorials

How to Reset the Service Light on a Renault Symbol
How to Reset the Service Light on a Renault Symbol
Renault Symbol (2012-2019 / Symbol III) Whenever you change the engine oil and the corresponding filter on your vehicle, as specified in the owner's manual, you need to reset the service li…
How to Replace the Fuel Filter on the Renault Symbol
How to Replace the Fuel Filter on the Renault Symbol
Renault Symbol (1999-2008 / Symbol I) To replace the fuel filter on the Renault Symbol, you need to lift the car to access the components underneath. In the lower central area, you will l…
How to Replace the Cabin Air Filter on a Renault Symbol 1
How to Replace the Cabin Air Filter on a Renault Symbol 1
Renault Symbol (1999-2008 / Symbol I) Let's see how to change the cabin air filter on a Renault Symbol 1: it is located in the engine compartment, on the passenger side, at the bottom of …

Other guides you may be interested in

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos