Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Cabin Air Filter on a Renault Symbol 1

Model: Renault Symbol Symbol I - Years: 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008
Part: Cabin air filter

See other generations:
Video tutorial

Let's see how to change the cabin air filter on a Renault Symbol 1: it is located in the engine compartment, on the passenger side, at the bottom of the windshield, under a plastic cover called the "debris shield." Open the hood, remove the rubber seal that runs along the base of the windshield, then take off the debris shield, which is secured with clips (although in the video it is just lifted).

Once the shield is removed, you will see the cabin air filter housing, and using a 6 mm socket, unscrew the screws that hold the cover.

Remove the filter, clean the housing, insert the new filter, ensuring the arrows point toward the cabin, and then close the cover. Reinstall the shield and put the rubber seal back in place at the base of the windshield.


Posted on 16 May 2026 by ScegliAuto


Related tutorials

How to Replace the Fuel Filter on the Renault Symbol
How to Replace the Fuel Filter on the Renault Symbol
Renault Symbol (1999-2008 / Symbol I) To replace the fuel filter on the Renault Symbol, you need to lift the car to access the components underneath. In the lower central area, you will l…
How to Change Engine Oil and Oil Filter on Renault Symbol
How to Change Engine Oil and Oil Filter on Renault Symbol
Renault Symbol (1999-2008 / Symbol I) Below are the steps to perform routine maintenance by replacing the engine oil and oil filter on the Renault Symbol. First, lift the vehicle and star…
How to Replace the Fuel Filter on the Renault Symbol
How to Replace the Fuel Filter on the Renault Symbol
Renault Symbol (2012-2019 / Symbol III) To replace the fuel filter on this car model, follow the images in the video and refer to the description below. First, lift the vehicle and locate t…

Other guides you may be interested in

How to Reset the Tyre Light on a Toyota Aygo?

To reset the tyre light on a Toyota Aygo, start by locating the reset button, which is found in the glove compartment of the front passenger side. Turn on the car and ensure that the tyres are at the correct pressure. Then, press and hold the reset button for a few seconds until the tyre light either flashes or turns off, depending on the model. Release the button and wait for the reset procedure to complete. Restart your Toyota Aygo and check if the tyre light has turned off, indicating that the reset was successful.

Watch the video!


by ScegliAuto

More videos