Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Cabin Air Filter on a Renault Symbol

Model: Renault Symbol Symbol III - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Cabin air filter

See other generations:
Video tutorial

Here is how to perform a DIY intervention to replace the cabin air filter on your vehicle. First, open the hood and remove the seal from the left side near the windshield.

Pry to release the clips securing the plastic panel located just below the windshield. Using a 6 mm socket wrench, remove the cover of the compartment containing the filter, then extract the filter and replace it with the new one, ensuring compatibility with your vehicle.

Reposition the compartment cover, screw in the bolt, reattach the plastic panel, and the seal. Finally, close the hood.


Updated on 3 July 2026 by ScegliAuto


Related tutorials

How to Replace the Fuel Filter on the Renault Symbol
How to Replace the Fuel Filter on the Renault Symbol
Renault Symbol (1999-2008 / Symbol I) To replace the fuel filter on the Renault Symbol, you need to lift the car to access the components underneath. In the lower central area, you will l…
How to Replace the Cabin Air Filter on a Renault Symbol 1
How to Replace the Cabin Air Filter on a Renault Symbol 1
Renault Symbol (1999-2008 / Symbol I) Let's see how to change the cabin air filter on a Renault Symbol 1: it is located in the engine compartment, on the passenger side, at the bottom of …
Where is the fuse box of the Renault Symbol located?
Where is the fuse box of the Renault Symbol located?
Renault Symbol (2012-2019 / Symbol III) The Renault Symbol has two fuse boxes inside. The first fuse box is located inside the cabin, behind the left side dashboard panel. The second fuse b…

Other guides you may be interested in

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos