Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of Oil Feed Pipe

Model: Renault Megane Megane 1 - Years: 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003
Part: Turbocharger

See other generations:
Video tutorial

At the centre of the turbocharger is the so-called variable geometry which allows for the adjustment of the turbocharger; this is necessary to maintain the oil feed pressure as constant as possible across a wide range of engine RPM. The variable geometry of the turbines continuously regulates their power.

Adjustable guide vanes can ensure this performance across a wide range of settings while maintaining a good level of efficiency.

A low engine RPM corresponds to a lower gas pressure, therefore the guide vanes are adjusted to narrow the section in the turbocharger, thus inducing an increase in gas pressure. Conversely, high engine speeds also lead to an increase in exhaust gas pressure, causing the intake duct section to be increased by adjusting the position of the guide vanes.

This system must be lubricated, which is why there is a pipe that controls the oil feed.


Updated on 12 February 2026 by ScegliAuto


Related tutorials

Replacing the Cabin Fan on the Renault Megane
Replacing the Cabin Fan on the Renault Megane
Renault Megane (2002-2010 / Megane 2) This guide will show you the main steps to remove and replace the cabin fan on the Renault Megane. First, get into the vehicle and start unscrewing a…
Replacing the air filter on the Renault Megane
Replacing the air filter on the Renault Megane
Renault Megane (2002-2010 / Megane 2) Among the operations scheduled for the Renault Megane service is the replacement of the air filter that feeds the engine. To carry this out, open the…
Replacement of the cabin air filter of the Renault Megane
Replacement of the cabin air filter of the Renault Megane
Renault Megane (2002-2010 / Megane 2) In a few simple steps, we will see the process of disassembling and replacing the cabin air filter of the Renault Megane. First, get into the car and…

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos