Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the air filter on the Renault Megane

Model: Renault Megane Megane 2 - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Air filter

See other generations:
Video tutorial

Among the operations scheduled for the Renault Megane service is the replacement of the air filter that feeds the engine. To carry this out, open the bonnet of the engine compartment; you will find the filter box behind the battery, on the driver's side.

Before proceeding with the replacement, remove the solenoid from its support and move it to the side on the left. Using a flathead screwdriver, unscrew the two screws on either side of the flange that holds the filter.

Pull the flange towards you and then upwards to remove it, take out the old filter element and replace it with a new one. Refit the flange, secure it with its screws, and reposition the solenoid on its support.


Updated on 2 September 2026 by ScegliAuto


Related tutorials

Replacing the Cabin Air Filter on the Renault Megane 4
Replacing the Cabin Air Filter on the Renault Megane 4
Renault Megane (2015-2023 / Megane IV, Megane 4) To ensure that clean air circulates in the climate control system of the Renault Megane IV, an external air intake filter is fitted, which must be re…
Replacing the Air Filter on Renault Megane 1.4 TCe
Replacing the Air Filter on Renault Megane 1.4 TCe
Renault Megane (2008-2015 / Megane III, Megane 3) This brief tutorial explains how to replace the air filter on a Renault Megane 1.4 TCe of the third generation, produced from 2008 to 2015. This is a…
Replacing the Air Filter on a Renault Megane
Replacing the Air Filter on a Renault Megane
Renault Megane (2002-2010 / Megane 2) Replacing the air filter that feeds the injection system of the Renault Megane is an important task that allows the engine to breathe better and keep…

Other guides you may be interested in

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos