Do it yourself
Frequently asked questions about cars and motorcycles

Air filter replacement on Renault Megane 1.4 TCe.

Model: Renault Megane Megane 3, Megane III - Years 2008-2015
Part: Air filter

Let's see through this short tutorial today how to replace the air filter on a third-generation Renault Megane 1.4 TCe, model produced from 2008 to 2015. This is a very simple operation that anyone can do, which will allow us to save some money on labor. So first of all, let's open the vehicle's engine hood, then using a cross key, let's unscrew the two screws on the sides of the filter box flange, then grab the flange and remove it, thus removing the support where the air filter is mounted. Once this is done, all we have to do is remove the old air filter and replace it with a new one, then reassemble everything following the reverse procedure.


Posted on 26 August 2023 by ScegliAuto



How to replace the engine air filter of the Renault Megane 3
Renault Megane (2008-2015 / Megane 3, Megane III) If the engine of your Renault Megane Mk3 often overheats even at low speeds, it is very likely that it is time to replace the air filter. In this new
How to replace the air filter of the Renault Megane 4.
Renault Megane (2015-2023 / Megane IV, Megane 4) If the engine of your Renault Megane Mk4 overheats abnormally due to the air filter being too old, then you must replace it as soon as possible. Belo
Replacement of the cabin air filter of the Renault Megane 4.
Renault Megane (2015-2023 / Megane IV, Megane 4) To ensure that clean air always circulates in the air conditioning system of the Renault Megane IV, a special filter is mounted on the intake of outs

Other guides that may interest you

How to deactivate the safe lock on a Volkswagen Golf.

The safe lock is indeed an anti-theft system that prevents thieves from accessing the car. This device locks the doors, both externally and internally, when the driver activates the central locking remote control after leaving the vehicle. To permanently disable it, it is necessary to use a diagnostic program such as VCDS that we will connect to the vehicle through the ODBII port. Then wait for the connection and recognition of the control unit and then select the blocks present and locate the safe lock to disable it. And the job will be completed.

Watch the video!


by ScegliAuto

More videos