Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Glow Plugs on the Renault Talisman 1.5 dCi - Samsung SM6

Model: Renault Talisman MK 1 - Years 2015-2023
Part: Glow plugs

In this guide, you will learn how to remove and replace the glow plugs on the Renault Talisman 1.5 dCi, as well as the Samsung SM6. First, open the bonnet of your car and start unscrewing the screws securing the plastic cover on the top of the engine to remove it; then, disconnect all the electrical connectors of the glow plugs, as shown in the video. At this point, use a socket wrench with an extension to unscrew and remove them; screw in the new ones by hand and tighten to the torque specified in the vehicle's user and maintenance manual.

Updated on 30 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Diesel Filter on the Renault Talisman dCi - Samsung SM6
How to Replace the Diesel Filter on the Renault Talisman dCi - Samsung SM6
Renault Talisman (2015-2023 / MK 1) .. on the Renault Talisman dCi, as well as the Samsung SM6. First, raise the vehicle and locate the diesel filter; then, unscrew the bleed valve to.. …
How to Replace the Front Brake Pads on the Renault Talisman - Samsung SM6
How to Replace the Front Brake Pads on the Renault Talisman - Samsung SM6
Renault Talisman (2015-2023 / MK 1) .. pads on the Renault Talisman, as well as the Samsung SM6. First, raise the vehicle and remove the front wheel; then, undo the bolts securing the.. …
Replacing the Reverse Light Bulb on the Renault Talisman - Samsung SM6
Replacing the Reverse Light Bulb on the Renault Talisman - Samsung SM6
Renault Talisman (2015-2023 / MK 1) .. bulb on the Renault Talisman, as well as the Samsung SM6. First, open the boot lid and start removing the trim behind the light; then, pull out the.. …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos