Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Reverse Light Bulb on the Renault Talisman - Samsung SM6

Model: Renault Talisman MK 1 - Years: 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
Part: Light bulb

Video tutorial

In today's tutorial video, we will see the instructions on how to disassemble and replace the reverse light bulb on the Renault Talisman, as well as the Samsung SM6. First, open the boot lid and start removing the trim behind the light; then, pull out the connector along with the bulb, as shown in the video.

Now, remove and replace the small reverse bulb, installing a new one (LED type).

Finally, install the connector back onto the rear light, following the video to the end.


Updated on 16 July 2026 by ScegliAuto


Related tutorials

How to Replace the Front Brake Pads on the Renault Talisman - Samsung SM6
How to Replace the Front Brake Pads on the Renault Talisman - Samsung SM6
Renault Talisman (2015-2023 / MK 1) .. pads on the Renault Talisman, as well as the Samsung SM6. First, raise the vehicle and remove the front wheel; then, undo the bolts securing the.. …
How to Replace the Diesel Filter on the Renault Talisman dCi - Samsung SM6
How to Replace the Diesel Filter on the Renault Talisman dCi - Samsung SM6
Renault Talisman (2015-2023 / MK 1) .. on the Renault Talisman dCi, as well as the Samsung SM6. First, raise the vehicle and locate the diesel filter; then, unscrew the bleed valve to.. …
How to Replace the Glow Plugs on the Renault Talisman 1.5 dCi - Samsung SM6
How to Replace the Glow Plugs on the Renault Talisman 1.5 dCi - Samsung SM6
Renault Talisman (2015-2023 / MK 1) .. on the Renault Talisman 1.5 dCi, as well as the Samsung SM6. First, open the bonnet of your car and start unscrewing the screws securing the plastic.. …

How to Reset the Tyre Light on a Toyota Aygo?

To reset the tyre light on a Toyota Aygo, start by locating the reset button, which is found in the glove compartment of the front passenger side. Turn on the car and ensure that the tyres are at the correct pressure. Then, press and hold the reset button for a few seconds until the tyre light either flashes or turns off, depending on the model. Release the button and wait for the reset procedure to complete. Restart your Toyota Aygo and check if the tyre light has turned off, indicating that the reset was successful.

Watch the video!


by ScegliAuto

More videos