Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Wiper Blades on the Renault Captur

Model: Renault Captur MK 2 - Years: 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Windshield wipers

See other generations:
Video tutorial

In this video, follow the procedure, with verbal description, on how to replace the wiper blades on a Renault Captur. First, switch off the engine and push the lever to operate the wipers upwards twice.

This will position the blades vertically, making the replacement easier. Disconnect the old blades and attach the new ones, ensuring the clips are securely locked.

At this point, push the control lever upwards once more to allow the blades to return to the horizontal position. Next, open the bonnet and secure it with the metal arm, check the level of the washer fluid and top it up if necessary, preferably with antifreeze in winter.

Operation complete.


Updated on 31 May 2026 by ScegliAuto


Related tutorials

How to Replace the Wiper Blades on a Renault Captur
How to Replace the Wiper Blades on a Renault Captur
Renault Captur (2013-2019 / MK 1) To replace the front and rear wiper blades of the Renault Captur, lift the arm and position it vertically. Press the central lever to slide the blade…
How do you replace the windshield wiper brush of the Renault Captur?
How do you replace the windshield wiper brush of the Renault Captur?
Renault Captur (2013-2019 / MK 1) The method for replacing the windshield wiper blade of the Renault Captur is not much different from the majority of cars on the road, in fact, this …
How to replace the wiper blades on the Renault Captur
How to replace the wiper blades on the Renault Captur
Renault Captur (2013-2019 / MK 1) If you want to proceed with the DIY replacement of the wiper blades on this vehicle, you can find some information on how to do this in this descript…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos