Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Turbo Lubrication Pipe

Model: Renault Laguna Laguna 2, MK 2, X74 - Years 2001-2007
Part: Engine

The lubrication pipe for the turbo has a geometry that allows passage without interfering with other engine components; therefore, place the lubrication eyelet on the turbo, securing it with a new pin and a new copper washer; then screw the nut to the base and secure the support clamp. The lubrication of the turbo is absolutely essential due to the high RPM and constant exposure to the high temperature of exhaust gases: the cooling action of the oil should not be overlooked. It is therefore crucial to ensure a constant supply of oil to the turbo.

Updated on 12 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Complete Cylinder Head Revision Instructions
Complete Cylinder Head Revision Instructions
Renault Laguna (2001-2007 / Laguna 2, MK 2, X74) After machining the cylinder head, check the flatness of the surface with a straight edge and a feeler gauge for valves; proceed to replace the valve…
Replacement of Stud Bolts and Gaskets
Replacement of Stud Bolts and Gaskets
Renault Laguna (2001-2007 / Laguna 2, MK 2, X74) If maintenance requires the removal of the turbocharger, replace the stud bolts and gaskets before reinstalling it. Once the old studs are removed, i…
Replacing the headlight bulbs on Renault Laguna
Replacing the headlight bulbs on Renault Laguna
Renault Laguna (2007-2015 / MK III, Laguna 3, MK 3, Laguna III, X91) Let's see the replacement of the headlight bulbs on Laguna. We raise the front hood, we secure the same. We locate the back of the headlight (we remo…

How to Change the H7 Headlight Bulb on an Audi A3

When replacing the front headlight bulbs, choosing the right bulbs is certainly the first hurdle to overcome: halogen, blue white light, xenon, or LED. Once you have made your choice, installing the new bulb can be done without removing the headlight. Simply open the front bonnet, locate the protective cap of the bulb holder, and press on the corresponding latch to remove it. Then grasp the bulb's power connector and pull it out along with the bulb itself, disconnect the connector, fit the new bulb, and press it into its seat until it clicks into place.

Watch the video!


by ScegliAuto

More videos