Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Rear Light Bulb Replacement

Model: Renault Megane Megane 1 - Years: 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003
Part: Tail light bulb

See other generations:
This video is currently unavailable

To replace the bulbs of the so-called third brake light, simply open the boot, remove the plastic cover protecting the light, disconnect the power connector and the bulb holder by pressing on the securing tabs; at this point, remove the old bulbs and fit the new ones (it is recommended to replace them all to avoid differences in brightness: these are T5 model bulbs); then proceed in reverse for reassembly and ensure correct operation before refitting the plastic cover.


Updated on 12 February 2026 by ScegliAuto


Related tutorials

Replacing the Rear Headlamp Bulb on Renault Megane
Replacing the Rear Headlamp Bulb on Renault Megane
Renault Megane (2008-2015 / Megane III, Megane 3) Open the boot and observe the area behind the affected headlamp. You will notice a cover that can be easily removed by hand. Once done, you will have…
How to Change the Rear Headlamp Bulb on Megane
How to Change the Rear Headlamp Bulb on Megane
Renault Megane (2002-2010 / Megane 2) Replace the damaged bulbs inside the rear headlamp of a Megane. Open the boot and remove the side trim panel. Locate the plastic components of the bu…
Guide to Replacing Glow Plugs
Renault Megane (1995-2003 / Megane 1) Replacing glow plugs is a fundamental task in the maintenance of any vehicle, as worn plugs can compromise the proper functioning of the engine. This…

How to Reset the AdBlue Warning Light on a Peugeot Boxer

To reset the AdBlue system on a 2018 Peugeot Boxer, follow these steps: Start the engine and ensure the vehicle is parked in a well-ventilated area. Locate the "MENU" button on the dashboard or steering wheel controls. Press and hold the "MENU" button until the menu options appear on the display. Use the arrow buttons or scroll wheel to access the "Vehicle Settings" or "Settings" menu. Select the "AdBlue" or "AdBlue System" option. Look for the "Recharge" or "Reset" option in the AdBlue menu. Once you find the reset option, select it and confirm your choice when prompted. The system will be reset, and a confirmation message may appear on the display. Turn off the engine and wait a few seconds. Restart the engine and check that the AdBlue system has been reset.

Watch the video!


by ScegliAuto

More videos