Do it yourself
Frequently asked questions about cars and motorcycles

How to Remove the Stock Radio from a Renault Megane 2

Model: Renault Megane Megane 2 - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Car stereo

See other generations:
Video tutorial

If you want to remove the stock radio from your Renault Megane Mk2 to repair it or simply replace it with a more modern model, follow these steps. First, as this is a potentially hazardous component, ensure the car is turned off during the entire procedure.

Once this simple precaution is taken, obtain two thin double-ended rods and insert them into the four holes located at the corners of the radio. At this point, gently pull towards you and finally disconnect the radio from the electrical connector.


Updated on 4 June 2026 by ScegliAuto


Related tutorials

Renault Megane (2002-2010 / Megane 2) Removing the radio from a Megane? Let's see how to take out the radio and disconnect the electrical connectors. Use the original or aftermarket metal…
Renault Megane (2008-2015 / Megane III, Megane 3) In today's tutorial video, you will learn how to remove the original car radio from a Renault Megane third series. First, get inside the car: use a p…
Renault Megane (2002-2010 / Megane 2) Before starting, sit in the driver's seat of your Renault Megane. Begin by inserting the extraction keys into the holes on the front of the radio to …

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos