Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Air Filter on the Renault Clio?

Model: Renault Clio Clio IV, MK 4, Clio 4 - Years 2012-2019
Part: Air filter

In this tutorial, we will see how to replace the air filter on the Renault Clio 4, a very simple and quick operation. Before proceeding, wait for the engine to be completely cool to work safely. Start by opening the bonnet, then locate the airbox situated just behind the battery. Once you have done this, squeeze the two side clips inward, lift the cover, and remove the old filter. Finally, clean the inside of the housing from any dirt residue and install the replacement by simply following the reverse procedure.

Updated on 5 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the air filter of the Renault Clio 2012
How to replace the air filter of the Renault Clio 2012
Renault Clio (2005-2013 / MK 3, Clio 3, Clio III) Replacing the engine air filter of your Renault Clio third series (year 2012) is really simple and thanks to the procedure described below, you will …
How to Change the Engine Air Filter on a Renault Clio 4
How to Change the Engine Air Filter on a Renault Clio 4
Renault Clio (2012-2019 / Clio IV, MK 4, Clio 4) To replace the engine air filter on your Renault Clio fourth generation by yourself, you only need a few minutes. All you have to do is read the foll…
How to replace the engine air filter of the Renault Clio 5
How to replace the engine air filter of the Renault Clio 5
Renault Clio (2019-2026 / Clio V, Clio 5) If it is time to replace the engine air filter of your Renault Clio fifth series, all you need to do is read the following guide carefully and follow…

Other guides you may be interested in

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos