Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Renault
  4. :
  5. Scenic
  6. : Alternator belt replacement

Renault Scenic - Video tutorial

Model: Renault Scenic - Years 1996-2003
Part: Alternator
Operation: Alternator belt replacement

Lift the car sideways, then remove the front wheel on the passenger side, the stone guard and the protective casing in order to easily access the pulleys driven by the auxiliary belt; then loosen the tensioner located just behind the alternator and remove the auxiliary belt, memorizing the passages of the belt between the pulleys; check the compatibility of the new belt (number of grooves and length) and position it between the various pulleys respecting the various passages; tension it through the special tensioner and reassemble what was previously removed.


Posted on 7 August 2023 by ScegliAuto



Guide to disassembling the alternator of the Renault Scenic 1.9 DCi
Renault Scenic (2003-2009 / MK 2, Scenic 2) Below we will see the steps that will allow us to disassemble and replace the alternator of the Renault Scenic 1.9 DCi. First, lift the vehicle and r
Remove the Renault Scenic alternator
Renault Scenic (2003-2009 / MK 2, Scenic 2) Is the alternator of our Scenic no longer working? Let's see how the alternator is removed from inside the engine compartment. We lift the front hood
How to replace the alternator on Renault Scenic
Renault Scenic (2003-2009 / MK 2, Scenic 2) Alternator not charging? Let's see how it disassembles. To remove the alternator we have to remove the headlights and the bumper. We pull the bar loc

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos