Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Alternator from a Renault Scenic

Model: Renault Scenic MK 2, Scenic 2 - Years 2003-2009
Part: Alternator

Is the alternator on your Scenic no longer working? Here’s how to remove the alternator from the engine bay. Lift the front bonnet of the car, locate the power battery, and disconnect the terminals. Use a socket spanner to undo the bolts on the sides of the alternator, taking care not to damage the wiring harness: remove all the securing bolts of the alternator. Once disassembled, pull it out from its designated space. Take the new replacement part and insert it into the appropriate housing, tighten the securing bolts, then tighten the side bolts of the alternator. Finally, reconnect the belt and the electrical terminals.

Updated on 9 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacement of the Alternator in the Renault Scenic 1.5 dCi
Replacement of the Alternator in the Renault Scenic 1.5 dCi
Renault Scenic (2009-2015 / Scenic 3, MK 3, MK III, Scenic III) Today's main instructions will allow us to dismantle and replace the alternator in the Renault Scenic 1.5 dCi. First, open the vehicle's bonnet and b…
Guide to Removing the Alternator from the Renault Scenic 1.9 DCi
Guide to Removing the Alternator from the Renault Scenic 1.9 DCi
Renault Scenic (2003-2009 / MK 2, Scenic 2) The following steps will allow you to remove and replace the alternator on the Renault Scenic 1.9 DCi. First, raise the vehicle and remove the front …
How do you replace the alternator of the Renault Scenic?
How do you replace the alternator of the Renault Scenic?
Renault Scenic (2009-2015 / Scenic 3, MK 3, MK III, Scenic III) It will be possible to replace the alternator of the Renault Scenic by first removing the front bumper and the right front wheel: to do this, it will…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos