Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace Dipped Beam Bulbs in the Renault Fluence?

Model: Renault Fluence MK 1 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Headlight bulb

Video tutorial

In this tutorial, you will see how to replace the dipped beam bulbs in the Renault Fluence, a very simple and quick operation. First, open the bonnet and remove the three screws securing the headlamp using a Torx screwdriver.

Once done, grasp the headlamp and gently pull it outwards, just enough to gain some manoeuvring space at the back. At this point, remove the rear cover, disconnect the connector, and extract the bulb by unlocking the metal clip.

Avoid touching the new bulb with bare hands to prevent leaving any residue.


Updated on 14 June 2026 by ScegliAuto


Related tutorials

How to reset the service in the Renault Fluence?
How to reset the service in the Renault Fluence?
Renault Fluence (2009-2019 / MK 1) Resetting the service in the Renault Fluence, as we can see in this tutorial, is an extremely simple and quick operation. Before proceeding, we must …
How to replace the starter motor in the Renault Fluence?
How to replace the starter motor in the Renault Fluence?
Renault Fluence (2009-2019 / MK 1) In this tutorial, you will see how to remove the starter motor in the Renault Fluence, a very simple and quick operation. First, ensure the key is no…
How to Reset the Service Light on a Renault Fluence?
How to Reset the Service Light on a Renault Fluence?
Renault Fluence (2009-2019 / MK 1) In this tutorial, you will learn how to reset the service light on a Renault Fluence, a task that is extremely simple and quick, to be performed only…

How to open the boot if it is stuck on a Mercedes B-Class?

On the Mercedes B-Class, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In this case, perform the emergency opening by following the simple procedure shown in this tutorial. First, unlock the locks with the remote control, then open the rear doors and, by operating the indicated lever, lower the backrest of the seat. Next, go inside the boot, locate the indicated gap, and manually unlock the lock using a small screwdriver.

Watch the video!


by ScegliAuto

More videos