Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the starter motor in the Renault Fluence?

Model: Renault Fluence MK 1 - Years 2009-2019
Part: Starter motor

In this tutorial, you will see how to remove the starter motor in the Renault Fluence, a very simple and quick operation. First, ensure the key is not inserted, then open the bonnet and disconnect the negative terminal of the battery. Next, locate the starter motor in the lower front area of the engine, disconnect the power leads, and from underneath, undo the fixing bolts using a 13mm socket. At this point, you can separate the starter motor from the mount, position the replacement, and follow the reverse procedure.

Updated on 6 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light on the 2011 Renault Fluence?
How to Reset the Service Light on the 2011 Renault Fluence?
Renault Fluence (2009-2019 / MK 1) To reset the service light on the 2011 Renault Fluence, use the arrow buttons located at the end of the lever on the right side of the steering wheel…
Where is the OBD port located on the 2015 Renault Fluence?
Where is the OBD port located on the 2015 Renault Fluence?
Renault Fluence (2009-2019 / MK 1) If you have not been able to locate the OBD port inside your 2015 Renault Fluence, don't worry because in the following guide we will explain where i…
How to replace the cabin air filter of the 2013 Renault Fluence
How to replace the cabin air filter of the 2013 Renault Fluence
Renault Fluence (2009-2019 / MK 1) If you want to replace the cabin air filter in your Renault Fluence (year 2013), just follow the procedure described in the following guide. First of…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos