Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service on the Renault Trafic Van?

Model: Renault Trafic MK 2 - Years: 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
Part: Service warning light

See other generations:
Video tutorial

In this tutorial, you will see how to reset the service on the Renault Trafic van, a very simple and quick operation to perform only after completing all the maintenance tasks. First, insert the key but leave it in the initial position, then press the accelerator pedal down fully and, at the same time, switch on the instrument panel.

At this point, while keeping the accelerator pressed, press the brake pedal three times in quick succession, holding it down on the third press. Maintain this position until the warning light disappears from the display.


Updated on 20 June 2026 by ScegliAuto


Related tutorials

How to Reset the Service Light on a Renault Trafic Van?
How to Reset the Service Light on a Renault Trafic Van?
Renault Trafic (2014-2026 / MK 3) In this tutorial, you will learn how to reset the service light on a Renault Trafic van. This operation is extremely simple and quick, to be performe…
How to Reset the Service Light on a Renault Trafic Van?
How to Reset the Service Light on a Renault Trafic Van?
Renault Trafic (2014-2026 / MK 3) In this tutorial, you will see how to reset the service light on a Renault Trafic van, a procedure to be carried out only after completing all requir…
How to Reset the Service in a Renault Trafic Van
How to Reset the Service in a Renault Trafic Van
Renault Trafic (2014-2026 / MK 3) This tutorial shows how to reset the service in a Renault Trafic van, a very simple and quick operation to be performed only after completing all sch…

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos