Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Cabin Fan in a Renault Clio?

Model: Renault Clio Clio IV, MK 4, Clio 4 - Years 2012-2019
Part: Blower motor

In this tutorial, see how to replace the cabin fan in a Renault Clio, a very simple operation. First, sit in the passenger seat, then remove the two pins located in the hinges of the glove compartment, open it, and unclip it from the dashboard. Next, locate the fan on your left, just in front of the partition wall, then press the two clips around the perimeter and, at the same time, rotate it counterclockwise. At this point, you can pull it out of the housing, disconnect the power connector, and install the replacement by following the reverse procedure.

Updated on 21 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacement of the Cabin Fan in the Renault Clio
Replacement of the Cabin Fan in the Renault Clio
Renault Clio (1990-1998 / Clio 1, MK 1) In this brief guide, we will go through the steps on how to remove and replace the cabin fan in the Renault Clio. First, open the car's bonnet and st…
Disassembly of the Renault Clio cabin fan
Disassembly of the Renault Clio cabin fan
Renault Clio (2005-2013 / MK 3, Clio 3, Clio III) In this guide, we will see the main instructions on how to disassemble and replace the cabin fan of the Renault Clio. First of all, we get on board t…
How to replace the fan of the Renault Clio
How to replace the fan of the Renault Clio
Renault Clio (1998-2005 / Clio 2, MK 2) When the cabin fan of the second generation Renault Clio is not working, it is necessary to replace the fan and check the connector. To perform this …

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos