Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Maintenance Service on the Renault Captur

Model: Renault Captur MK 2 - Years 2019-2026
Part: Warning light – error code

In this video, you will learn how to reset the maintenance service on the Renault Captur. This is a very simple operation that will take no more than a minute. First, turn on the ignition and look at the central display above the digital speedometer. Now, using the arrows located at the end of the lever on the right side of the steering wheel (the one for the indicators), start searching for the maintenance service function. Once found, press and hold the button on the lever until the 'Service' message starts to flash. Now press the button again until the message is reset.

Updated on 26 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service on the Renault Captur MK2
How to Reset the Service on the Renault Captur MK2
Renault Captur (2013-2019 / MK 1) In this video, you can see how to reset the service after changing the oil on the Renault Captur MK2: first, turn on the ignition without starting th…
Service reset on a Renault Captur
Renault Captur (2013-2019 / MK 1) In today's video, we will see how to reset the service on a first-generation Renault Captur. So let's start the reset procedure by turning on the car…
Renault Captur: How to Reset the Service with the Display in German
Renault Captur: How to Reset the Service with the Display in German
Renault Captur (2013-2019 / MK 1) On the Renault Captur, turn on the ignition and navigate the instrument cluster display to the maintenance screen. Using the steering wheel controls …

Other guides you may be interested in

    Frequently Asked Questions

    • Captur 2019-2026 - What are the warning lights of the 2020 Renault Captur? Read answer
    • Captur 2013-2019 - What do the warning lights in the dashboard of the Renault Captur mean? Read answer

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos