Do it yourself
Frequently asked questions about cars and motorcycles

How to Reset the Service Light on a 2014 Renault Captur

Model: Renault Captur MK 1 - Years: 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Service warning light

See other generations:
Video tutorial

The video shows how to reset the service light on a 2014 Renault Captur. The operation requires a few simple steps.

First, turn on the ignition by pressing the start/stop button as shown in the video. Next, to navigate the instrument panel menu, use the buttons located at the end of the lever on the right of the steering wheel (up and down buttons).

Scroll through the options until you reach 'service due' and hold down the aforementioned buttons until the message 'maintenance in 0KM/12 months' appears. At this point, press the buttons at the end of the right lever until the message on the display starts to flash; once it stops flashing, the maintenance reset will be complete.


Updated on 30 June 2026 by ScegliAuto


Related tutorials

Renault Captur (2013-2019 / MK 1) To reset the Service light on a Renault Captur, turn on the instrument panel to navigate through the menu: press the button located at the bottom of …
Renault Captur (2013-2019 / MK 1) To reset the Service light of the Renault Captur, turn on the instrument panel and then press the button located at the bottom of the end of the leve…
Renault Captur (2013-2019 / MK 1) You can clear the Service light from the instrument cluster of the Renault Captur by turning on the ignition after inserting the key into the ignitio…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

How to Change the Key Fob Battery for an Audi Q8?

To change the key fob battery for an Audi Q8, start by locating the release button on the key. Press this button to extract the emergency mechanical key. With the mechanical key removed, find the visible slot in the key body. Use a small flathead screwdriver or a plastic tool to gently pry open the key fob shell. Once the shell is open, you will find the battery, usually a CR2032. Note the orientation of the battery before removing it. Remove the old battery and insert the new one, ensuring the positive (+) side is oriented correctly. Reassemble the key fob shell, making sure all pieces fit together snugly. Finally, reinsert the mechanical key into its housing. Your key should now function properly with the new battery.

Watch the video!


by ScegliAuto

More videos