Do it yourself
Frequently asked questions about cars and motorcycles

How to Open the Key Remote of a Renault Clio

Model: Renault Clio Clio IV, Clio 4, MK 4 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Key

See other generations:
Video tutorial

This guide provides the main instructions to disassemble and open the key remote of your Renault Clio. First, take the remote in hand and start by removing the physical key by pulling it from the electronic board; then, lever on the side to open the remote, accessing the battery and the electronic board, as shown in the video.

At this point, perform the repair on the board or replace the battery; if necessary, replace the buttons or the shell of the key, reassembling everything!


Updated on 3 July 2026 by ScegliAuto


Related tutorials

Renault Clio (2019-2026 / Clio V, Clio 5) Today's instructions will allow you to open the doors of a Renault Clio with a flat remote battery. First, take your remote and extract the physical …
Renault Clio (2012-2019 / Clio IV, Clio 4, MK 4) This guide will show you how to program the key remote for the Renault Clio by following the instructions below. First, get inside the vehicle with b…
Renault Clio (2005-2013 / Clio 3, MK 3, Clio III) Replacing the remote battery of a Renault Clio follows simple and quick steps that can be done independently. To replace the key battery, you need to…

How to Reset the AdBlue Warning Light on a Peugeot Boxer

To reset the AdBlue system on a 2018 Peugeot Boxer, follow these steps: Start the engine and ensure the vehicle is parked in a well-ventilated area. Locate the "MENU" button on the dashboard or steering wheel controls. Press and hold the "MENU" button until the menu options appear on the display. Use the arrow buttons or scroll wheel to access the "Vehicle Settings" or "Settings" menu. Select the "AdBlue" or "AdBlue System" option. Look for the "Recharge" or "Reset" option in the AdBlue menu. Once you find the reset option, select it and confirm your choice when prompted. The system will be reset, and a confirmation message may appear on the display. Turn off the engine and wait a few seconds. Restart the engine and check that the AdBlue system has been reset.

Watch the video!


by ScegliAuto

More videos