Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on a Renault Captur

Model: Renault Captur MK 1 - Years 2013-2019
Part: Service warning light

Video tutorial
Detailed instructions - Whenever you perform an oil change and replace the oil filter as part of the vehicle's maintenance schedule, you must update and reset the service light that illuminates on the dashboard. To do this, follow the simple instructions below and refer to the images in the video. First, access the cabin and turn on the ignition using the control at the end of the wiper lever, scroll through the on-board computer menu until you reach the reset service indication, and press the button, for example, the up arrow, for a few seconds until the light turns off and the next service indication is updated.

Updated on 6 July 2026 by ScegliAuto


Related tutorials

How to Reset the Service Light on the Renault Captur?
How to Reset the Service Light on the Renault Captur?
Renault Captur (2013-2019 / MK 1) From the display of the Renault Captur, you can completely clear the Service light by turning on the instrument panel to access the menu. To do this,…
How to Reset the Service Light on a Renault Captur?
How to Reset the Service Light on a Renault Captur?
Renault Captur (2013-2019 / MK 1) To reset the Service light on a Renault Captur, turn on the instrument cluster by rotating the key in the ignition. This will allow you to navigate t…
How to Reset the Service Light on a Renault Captur?
How to Reset the Service Light on a Renault Captur?
Renault Captur (2013-2019 / MK 1) To reset the Service light on a Renault Captur, turn on the instrument panel to navigate through the menu: press the button located at the bottom of …

Other guides you may be interested in

How to set the clock on the Vespa 125 Primavera?

To set the clock on the Vespa 125 Primavera, press and hold the black button located just below the black knob on the bike: keep the button pressed until the hour number starts to flash. Once it is flashing, you can change the hours with single presses of the same button; then, by pressing and holding the button again, the hour number will stop flashing and the minute number will start to flash, which can be modified in the same way, confirming the input by holding the button.

Watch the video!


by ScegliAuto

More videos