Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Oil Filter on a Captur

Model: Renault Captur MK 1 - Years: 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Oil filter

See other generations:
Video tutorial

In this video, we will see how to change the engine oil along with the appropriate filter. Lift your car on a column lift and remove the plastic engine cover with a Torx screwdriver.

Locate the filter cover that we will see later and the bolt under the oil sump next to the marked X. Unscrew it with a hex or square key; this will allow the oil to drain into a container for future disposal. After letting all the oil drain completely, re-screw the bolt in the sump and move on to the oil filter.

Unscrew the large black filter cover, remove the old filter, and insert the new one. Check that the cap has adhered well to the metal base. Finally, top up the oil reservoir with the new fluid following the manufacturer's recommendations.


Updated on 25 February 2026 by ScegliAuto


Related tutorials

How and When to Change the Engine Oil of the Renault Captur 0.9 TCe
How and When to Change the Engine Oil of the Renault Captur 0.9 TCe
Renault Captur (2013-2019 / MK 1) This guide will provide useful instructions for performing the routine maintenance service, replacing the engine oil and oil filter of the Renault Ca…
How to Change the Engine Oil and Filter on a Renault Captur
How to Change the Engine Oil and Filter on a Renault Captur
Renault Captur (2013-2019 / MK 1) To replace the engine oil and filter on a Renault Captur I, park the vehicle on a flat surface and wait for the engine to be slightly warm. Lift the …
How to Change the Air Filter on a Renault Captur
How to Change the Air Filter on a Renault Captur
Renault Captur (2019-2026 / MK 2) Do you want to attempt to replace the air filter on this model? The text below provides all the instructions and useful steps for the replacement, an…

Other guides you may be interested in

How to Open the Fuel Filler Flap in the Hyundai i30?

In this tutorial, you will learn how to open the fuel filler flap in the Hyundai i30, a very simple operation that follows the typical procedure of most vehicles. First, unlock the locks using the designated button on the remote, then open the driver's door, locate the release lever on the left side of the seat, and operate it. Next, move to the fuel filler flap, open it completely, unscrew the cap, and refuel as needed. To close the flap, simply press it gently.

Watch the video!


by ScegliAuto

More videos