Do it yourself
Frequently asked questions about cars and motorcycles

How to replace the engine oil filter and engine oil of the Renault Captur.

Model: Renault Captur MK 1 - Years: 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Engine oil

See other generations:
Video tutorial

Today we will explain how to replace the engine oil and oil filter on a Renault Captur 1 vehicle. To perform the engine oil replacement, we need to open the front hood and unscrew the cap of the oil reservoir where we will insert the pre-oil change liquid, which should act inside the reservoir for at least 20 minutes to clean the reservoir during the drainage of the used oil. We lift the vehicle on a lift or on jack stands, unscrew the nut of the oil pan, and let the oil drain into a container.

Using a 27 mm socket wrench, we loosen the nut of the oil filter to remove the casing. We clean the inside of the casing with a cleaner and a microfiber cloth; we place the new gasket on the filter casing and insert the new one before mounting the casing back in its place.

We close the nut of the oil pan and lower the vehicle to the ground by removing the jack stands. We pour about four liters into the oil reservoir and close the cap.


Posted on 19 January 2026 by ScegliAuto


Related tutorials

Renault Captur (2013-2019 / MK 1) This guide will provide useful instructions for performing the routine maintenance service, replacing the engine oil and oil filter of the Renault Ca…
Renault Captur (2013-2019 / MK 1) If you intend to change the engine oil and filter on this vehicle yourself, the steps and procedure to follow for a correct replacement are detailed …
Renault Captur (2013-2019 / MK 1) To replace the engine oil and filter on a Renault Captur I, park the vehicle on a flat surface and wait for the engine to be slightly warm. Lift the …

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos