Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Engine Oil on a Renault Captur

Model: Renault Captur MK 1 - Years 2013-2019
Part: Engine oil

If you intend to change the engine oil and filter on this vehicle yourself, the steps and procedure to follow for a correct replacement are detailed below. First, lift the vehicle and open the bonnet. Next, unscrew the oil drain plug after placing a container on the floor to collect the used oil. Then, unscrew the oil filter using the appropriate tool and replace it with a new one after changing the seal. Refit the oil drain plug and then return to the engine bay to fill the system with new engine oil.

Updated on 30 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How and When to Change the Engine Oil of the Renault Captur 0.9 TCe
How and When to Change the Engine Oil of the Renault Captur 0.9 TCe
Renault Captur (2013-2019 / MK 1) This guide will provide useful instructions for performing the routine maintenance service, replacing the engine oil and oil filter of the Renault Ca…
How to replace the engine air filter of the Renault Captur
How to replace the engine air filter of the Renault Captur
Renault Captur (2013-2019 / MK 1) To be able to replace the engine air filter of your Renault Captur completely independently, you really only need a few seconds. It is in fact a very…
How to reset the service light on the Renault Captur
How to reset the service light on the Renault Captur
Renault Captur (2019-2026 / MK 2) After replacing the engine oil, it will be necessary to reset the service maintenance light; let's see the reset procedure on the Renault Captur. Fir…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos