Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Filling the Windscreen Washer Reservoir

Model: Renault Twingo Twingo 1 - Years: 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004
Part: Windshield wipers

See other generations:
Video tutorial

The windscreen washer reservoir is located in the engine bay, just below the windscreen, behind the battery; before discussing what to fill the reservoir with, note that the earth cable passing to the battery terminal could break due to friction: position it to avoid this.

The choice of washer fluid is often seen as trivial, and many simply fill it with water: this solution, over time, can clog the nozzles due to limescale and does not provide any cleaning effect; therefore, it is advisable to use the appropriate fluid (available in ready-to-use or concentrated form to dilute) and avoid mixtures containing alcohol or dish soap.


Updated on 16 February 2026 by ScegliAuto


Related tutorials

Removing Windshield Washer Fluid Reservoir
Removing Windshield Washer Fluid Reservoir
BMW Serie 3 (1998-2006 / E46) Removing the windshield washer fluid reservoir is very simple and does not require special precautions. Open the hood and locate the reservoir behind…
Replacing the Windshield Washer Fluid Reservoir on a Volvo XC90
Replacing the Windshield Washer Fluid Reservoir on a Volvo XC90
Volvo Xc90 (2002-2014 / MK 1) Today, let's learn how to disassemble and replace the windshield washer fluid reservoir on a Volvo XC90. First, open the hood of the vehicle and star…
How to Check the AdBlue Level on a Jaguar F-Pace
How to Check the AdBlue Level on a Jaguar F-Pace
Jaguar F-Pace (2016-2024 / MK 1) To check the AdBlue level on a Jaguar F-Pace with a 2.0L diesel engine: turn on the ignition and then access the menu using the dedicated button loca…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos