Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Door Glass of the Renault Trafic?

Model: Renault Trafic MK 3 - Years 2014-2026
Part: Checks and maintenance

To replace the door glass of the Renault Trafic, you need to lever off an object to detach the trim surrounding the internal handle: once this is removed, you can loosen all the screws underneath. By unscrewing the one located on the side of the panel, you will be able to completely detach it and access the internal components: the glass must be disconnected from the window regulator mechanism and removed from its seat by detaching the seal. Then, insert the new glass, securing it to the mechanism and reassembling all previously removed components.

Updated on 8 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Renault Trafic (2001-2014 / MK 2) Is the mirror on your Renault Trafic damaged? Here’s how to remove and replace it from the vehicle. Use a lever to remove the inner cover of the mirr…
Renault Trafic (2001-2014 / MK 2) In this short guide, we will see the instructions that will allow us to disassemble and replace the front door handle of the Renault Trafic. First, l…
Renault Trafic (2014-2026 / MK 3) When the position light bulb on your Renault Trafic burns out, replace it as soon as possible for your safety and to avoid penalties. Open the bonnet…

Other guides you may be interested in

    Frequently Asked Questions

    • Trafic 2014-2027 - Where is the inertia switch located in the Renault Trafic van? Read answer
    • Trafic 2014-2027 - Why does the Start and Stop of a Renault Trafic not work? Read answer

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos