Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Instructions for Replacing the Internal Radiator

Model: Renault Megane Megane 2 - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Heater core

See other generations:
Video tutorial

The first symptom of a broken heating radiator is excessive misting of the windows from the inside, as well as wet carpet in the area of the central tunnel; the cost of the new part is quite low compared to the work required for replacement: in some car models, it is necessary to remove the dashboard, but this is not the case here; for this car model, it is sufficient to remove the glove compartment and some panels of the central tunnel to access the radiator; then disconnect the pipes, taking care to collect the coolant, and remove the respective fixing screws to extract the old radiator and install the new one; at the end of the installation, check the coolant level and bleed to eliminate any air bubbles.


Updated on 16 February 2026 by ScegliAuto


Related tutorials

Replacing the Cooling Radiator on a Renault Megane
Replacing the Cooling Radiator on a Renault Megane
Renault Megane (2002-2010 / Megane 2) In this guide, see the procedure to remove and replace the engine cooling radiator on a Renault Megane. First, open the bonnet of your car and start …
How to Replace the Radiator of the Renault Megane?
How to Replace the Radiator of the Renault Megane?
Renault Megane (1995-2003 / Megane 1) To replace the radiator of the Renault Megane, open the bonnet to access the engine bay and locate the radiator. This will be at the front of the eng…
How do you replace the heating radiator of the Renault Megane?
How do you replace the heating radiator of the Renault Megane?
Renault Megane (2008-2015 / Megane III, Megane 3) To replace the heating radiator of the Renault Megane, you need to remove the dashboard panel located next to the driver's footwell: once this panel …

Other guides you may be interested in

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos