Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Front Headlight Assembly of a Renault Twingo

Model: Renault Twingo Twingo 1 - Years: 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004
Part: Headlight

See other generations:
Video tutorial

Let’s briefly go through the steps to remove and replace the front headlight assembly of a Renault Twingo. First, open the bonnet of your car and start unscrewing the fixing screws found on the sides using a ratchet wrench; then disconnect the electrical connector of the bulbs located at the back, thus removing the headlight assembly, as shown in the video.

At this point, install the new front headlight and connect the electrical wiring of the bulbs, following the video tutorial to the end!


Updated on 12 July 2026 by ScegliAuto


Related tutorials

How do you replace the front headlight bulb of the Renault Twingo?
How do you replace the front headlight bulb of the Renault Twingo?
Renault Twingo (2007-2014 / Twingo 2) In order to replace the headlight bulb of the Renault Twingo, you need to open the hood so that you can access the components inside the engine compa…
How do you replace the front headlight bulb of the Renault Twingo?
How do you replace the front headlight bulb of the Renault Twingo?
Renault Twingo (2007-2014 / Twingo 2) To replace the headlight bulb of the Renault Twingo, you need to open the hood so that you can access the inner area of the corresponding optical gro…
How to Replace the Bulb in the Rear Light of a Renault Twingo?
How to Replace the Bulb in the Rear Light of a Renault Twingo?
Renault Twingo (2007-2014 / Twingo 2) This guide focuses on the Renault Twingo 2 and the replacement of one of the bulbs in the rear light assembly. All car owners know that over time, th…

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos