Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Remote Battery of the Renault Master Van?

Model: Renault Master MK 2 - Years 1997-2010
Part: Key

In this tutorial, you will see how to replace the remote battery of the Renault Master van, a very simple and quick operation. You will need a replacement 3V CR1220 battery and a small flathead screwdriver or equivalent tool. First, locate the slot in the bottom right corner, then insert the screwdriver into it, lever it open, and separate the two halves of the remote. Next, remove the old battery, place the new one in, ensuring correct polarity, and reassemble the remote.

Updated on 14 July 2026 by ScegliAuto

Video tutorial

Related tutorials

What is the Fuse Diagram for the Renault Master Van?
What is the Fuse Diagram for the Renault Master Van?
Renault Master (1997-2010 / MK 2) If a device in your Renault Master van suddenly stops working, first check the status of the relevant fuses, the diagrams for which are indicated in …
What is the fuse diagram for the Renault Master van?
What is the fuse diagram for the Renault Master van?
Renault Master (2010-2023 / MK 3) In this video, you can see the location of the fuse boxes of the Renault Master van and their corresponding diagrams, useful if you need to check the…
Replacing the Remote Control Battery of the Renault Master
Replacing the Remote Control Battery of the Renault Master
Renault Master (2010-2023 / MK 3) With use, the battery of the remote control that opens the doors of the Renault Master depletes and needs replacing. To do this, use a small cross-he…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos