Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you set the clock on the Renault Kadjar?

Model: Renault Kadjar MK 1 - Years 2015-2022
Part: Clock

To set the clock on the Renault Kadjar, you need to turn on the instrument panel so that you can access the central display on the dashboard. Once the display is on, select the "System" option and then "Time and date". By selecting these two options, you can modify the hours and minutes through a specific screen. When the correct time has been entered, you can return to the initial screen to verify that the modification has been made correctly. Finally, you can turn off the instrument panel by turning the appropriate key.

Posted on 12 April 2023 by ScegliAuto

Video tutorial

Related tutorials

How do you set the clock on the Renault Kadjar?
How do you set the clock on the Renault Kadjar?
Renault Kadjar (2015-2022 / MK 1) To adjust the clock of the Renault Kadjar, you need to turn on the instrument panel by inserting the ignition key into the corresponding slot: once t…
How to set the language on the Renault Kadjar
How to set the language on the Renault Kadjar
Renault Kadjar (2015-2022 / MK 1) Setting the language of the onboard computer of the Renault Kadjar is a very simple and quick operation, especially useful if you have rented a car i…
Where is the internal fuse box of the Renault Kadjar located?
Where is the internal fuse box of the Renault Kadjar located?
Renault Kadjar (2015-2022 / MK 1) In the following guide you will find the description of all the steps you need to follow to quickly find the internal fuse box of your Renault Kadjar…

Other guides you may be interested in

Removing and Replacing a Front Headlamp of a Lancia Lybra

This video explains how to remove and replace the front headlamp and its bulbs on a Lancia Lybra. The car has a very simple and quick headlamp removal system. To start, lift the bonnet, reach into the engine bay, and (specifically at the rear of the headlamp) unclip the metal tab that secures the headlamp, then use a screwdriver to undo the few Torx screws. After removing the screws, unclip the headlamp and pull it out from the bumper, disconnect the power connectors, and replace any damaged bulbs or the entire unit. The reassembly phase is very straightforward: insert the headlamp into the bumper housing as shown in the video, secure the metal tab until the headlamp clicks into place (screw in the securing screws). Finally, test the correct operation of the lights.

Watch the video!


by ScegliAuto

More videos