Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Renault
  4. :
  5. Scenic
  6. : How do you reset the Service light on a Renault Scenic 2?

Renault Scenic - Video tutorial

Model: Renault Scenic MK 2, Scenic 2 - Years 2003-2009
Part: Checks and maintenance
Operation: How do you reset the Service light on a Renault Scenic 2?

The operation to reset the Service light on the Renault Scenic 2 is done by inserting the car's key card into its slot and turning on the dashboard using the appropriate ignition button. Once the dashboard is on, you can hold down the button located on the lever to the right of the steering wheel for a few seconds. This will cause the light to start flashing, and you can release the button once it disappears completely. After resetting the light, you will need to turn off and then turn on the dashboard to confirm.


Posted on 16 April 2023 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Scenic 2009-2015 - Where is the OBD port located on the Renault Scenic 3? Read Answer
    • Scenic 1993-2003 - Why did the steering wheel light come on in the Renault Scenic? Read Answer
    • Scenic 2009-2015 - What does the Stop warning light indicate on the Renault Scenic 1.9 dci? Read Answer
    • Scenic 2003-2009 - What is the purpose of the fuse diagram in the 2006 Renault Scenic? Read Answer
    • Scenic 2003-2009 - Did the Renault Scenic 1.5 dci 2005 present probable problems in the past? Read Answer
    • Scenic 2009-2015 - What is the purpose of the Renault Scenic's alarm fuse? Read Answer
    • Scenic 2016-2022 - Why did the engine malfunction light turn on in the Renault Scenic? Read Answer
    • Scenic 2003-2009 - What are the main problems with the 2004 Renault Scenic 1.5 DCi? Read Answer
    • Scenic 2009-2015 - What does the STOP warning light on the Renault Scenic indicate? Read Answer
    • Scenic 2003-2009 - What problems could the Renault Scenic 1.9 dci have presented in the past? Read Answer
    • Scenic 2009-2015 - What are the problems with the Renault Grand Scenic 1.5 DCI? Read Answer
    • Scenic 2003-2009 - What are the problems with the Renault Scenic X Mod 1.5 dci? Read Answer
    • Scenic 2009-2015 - Why does the brake system failure warning light come on in the Renault Scenic? Read Answer
    • Scenic 2009-2015 - What are the problems with the Renault Scenic? Read Answer
    • Scenic 2016-2022 - What are the problems with the Renault Scenic 1.5? Read Answer
    • Scenic 2003-2009 - Where is the fuel tank on the Renault Scenic? Read Answer
    • Scenic 2009-2015 - Where is the third brake light fuse located on Renault Scenic 3? Read Answer
    • Scenic 2016-2022 - What does the AdBlue light on the Scenic 4 mean? Read Answer
    • Scenic 2003-2009 - Where is the blower motor resistor located on Renault Scenic II? Read Answer
    • Scenic 2009-2015 - How to reset the Renault Scenic 3 service light? Read Answer

How to reset the tire pressure warning light on Dacia Sandero?

Let's see below how it is possible to reset the low tire pressure signal on the car: first of all it is necessary to check the correct tire pressure by comparing it with the pressures reported in the use and maintenance manual. After that, turn on the ignition and locate the command on the right side of the steering wheel at the top that allows you to access the on-board computer menu, then select the car symbol, after which select the "up arrow" command up to that the indication "tire pressure" appears on the display. At that point, press the "Ok" control on the steering wheel and keep it pressed to reset the signal.

Watch the video!


by ScegliAuto

More videos